User guide

Matrox Avio Series – User Guide 17
Avio F120 Receiver – Back
Connector descriptions
Connector
TX RX
Description Required host
connection
12V DC power
input
99 Connect the 12V DC power supply included
with your product to this connector. While the
12V DC power supply is connected to the unit
and electrical socket, the power LED ( ) is
active (green).
Dedicated USB
links
9 For host systems that don’t support keyboards
and mice through a USB hub at startup,
connect your host system to the dedicated
mouse and keyboard connectors on your
transmitter unit to support a keyboard and
mouse on your receiver unit. A USB A to mini-B
cable is required to connect to each of these
connectors. To purchase these cables, see the
Matrox online store (shopmatrox.com
).
Note: Your Avio unit only supports up to USB
2.0 connectors.
DVI-D SL/DL
*
9 Using the DVI-D cable provided with your
transmitter unit, connect the primary graphics
connector of your graphics hardware to this
connector on your transmitter unit.
Note: Your Avio unit only supports digital input
signals.
Debug SFP+
VGA+DVI SL/DL
*
(remote)
VGA+DVI SL
(remote)
12V DC
power input