- Matrox Triplehead2go Manual

Matrox TripleHead2Go – User Guide 43
Environmental
Notes
 For the latest compatibility information, see the Matrox Web site
(www.matrox.com/graphics/en/support/gxm_main).
 The display resolutions and refresh rates available depend on your monitor and software
monitor settings. For more information on the capabilities of your monitor, see your
monitor documentation.
 TripleHead2Go Digital Edition only – While using the DVI input connector on your
Matrox product, the highest display resolutions are available only with graphics
hardware that supports dual-link DVI.
 TripleHead2Go Digital Edition only – While using graphics hardware that supports only
single-link DVI output, the maximum display resolution is 2048 × 768 at 60 Hz in
DualHead mode and 2400 × 600 at 60 Hz in TripleHead mode.
 Certain Intel® integrated chipsets aren’t supported with Matrox TripleHead2Go.
 While using display resolutions above 2048 × 1536, certain graphics hardware may not
properly support 3D acceleration. For information on the capabilities of your graphics
hardware, see its documentation.
 TripleHead2Go DP Edition only – In clone mode , your Matrox product supports a
maximum display resolution of 2560 × 1600 while using DisplayPort output and
1920 × 1200 while using DVI output.
 TripleHead2Go Digital SE – In clone mode , your Matrox product supports a maximum
display resolution of 1920 × 1200.
Temperature, operational
5 to 45 ºC (41 to 113 ºF)
(near box ambient)
Temperature, non-operational
storage and transportation
-40 to 70 ºC (-40 to 158 ºF)
Humidity, operational (indoor) 20 to 80% (non-condensing)
Humidity, non-operational storage
and transportation
5% to 95% (non-condensing)
Atmospheric pressure, operational
650hPa (3,580 meters / 11,745 feet)
to 1013hPa (0 meters / 0 feet)
Atmospheric pressure,
non-operational and transportation
192hPa (12,000 meters / 39,370 feet)
to 1020hPa (-50 meters / -164 feet)