OWNERS MANUAL ULTRA Single-Station Strength G7-S33 Lat Pulldown
Table Of Contents Safety, General Care & Maintenence.....................................................................................................................3 Getting Started (Product Specifications)..............................................................................................................5 Assembly Information..............................................................................................................................................6 Markings.................
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INFORMATION It is the sole responsibility of the purchaser of Matrix products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of Matrix exercise equipment be informed of the following information prior to its use. PROPER USAGE Do not use any equipment in any way other than designed or intended by the manufacturer.
IMPORTANT SAFETY INSTRUCTIONS WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID INJURY! 1. Never allow children on strength training equipment. Teenagers must be supervised at all times while using this equipment. 2. All warnings and instructions should be read and proper instruction obtained prior to use. 3.
GETTING STARTED EXERCISE PLACARD | PRODUCT SPECIFICATIONS | MAINTENANCE CHECKLIST EXERCISE PLACARD PRODUCT SPECIFICATIONS TECH SPECS Maximum User Weight 136 kg / 300 lbs. Maximum Training Weight 109 kg / 240 lbs. Product Weight 398 kg / 878 lbs. Overall Dimensions (L x W x H) 154.9 x 151.9 x 196.8 cm / 61.0" x 59.8" x 77.
ASSEMBLY UNPACKING | TOOLS REQUIRED UNPACKING Thank you for purchasing a Matrix product. This machine is an EN957-1 and EN957-2 compliant Class S product. Your Matrix product is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. Carefully unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
MARKINGS WARNING LABEL LOCATIONS 7
Parts List 8 ID DESCRIPTION QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 User Frame Right Footpad Frame M10 X 30L Hex Head Bolt M10 Saddle Washer Left Footpad Frame M10 X 30L Socket Head Cap Screw M10 Flat Washer Weight Stack M10 Nylock Nut M10 X 75L Socket Head Cap Screw Connecting Tube M10 X 110L Socket Head Cap Screw Large Pivot Cap CAM Weight Stack Cable M10 X 50L Socket Head Cap Screw Pulley User Frame Cable (Preassembled to CAM) Swingarm Small Piv
Parts List ID DESCRIPTION QTY 34 35 36 37 38 39 40 41 42 43 44 45 46 Counter Weight M8 Flat Washer M8 X 15L Socket Head Cap Screw Axle M8 X 25L Socket Head Cap Screw Thigh Pad Assembly Pad M10 X 20L Button Head Cap Screw Left Front Shroud Right Front Shroud Rear Shroud M8 X 60L Socket Head Cap Screw Top Cap 2 6 4 1 2 1 1 4 1 1 1 4 1 9
ASSEMBLY PART 1: USER FRAME ASSEMBLY STEP 1 | USER FRAME INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 1 User Frame 1 2 Right Footpad Frame 1 3 M10 X 30L Hex Bolt 2 4 M10 Saddle Washer 2 View A Orient the saddle washer as shown 1 2 Tip frame as shown to access hardware.
ASSEMBLY STEP 2 | USER FRAME INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 3 M10 X 30L Hex Bolt 4 4 M10 Saddle Washer 4 5 Left Footpad Frame 1 PART 1: USER FRAME ASSEMBLY Tip frame as shown to access hardware.
ASSEMBLY STEP 3 | USER FRAME INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 4 M10 Saddle Washer 2 6 M10 X 30L SHC 2 PART 1: USER FRAME ASSEMBLY Tip frame as shown to access hardware.
ASSEMBLY STEP 4 | USER FRAME INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 6 M10 X 30L SHC 4 7 M10 Flat Washer 4 8 Weight Stack 1 PART 1: USER FRAME ASSEMBLY 7 6 8 • • • Rotate user frame onto foot pads Ensure that the user frame and weight stack are level with all floor pads contacting the floor equally Torque all M10 Frame Hardware on pages 10 - 13 to: 77 N-m/57 ft-lbs.
ASSEMBLY PART 1: USER FRAME ASSEMBLY STEP 5 | WEIGHT STACK CABLE INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 4 M10 Saddle Washer 2 6 M10 X 30L SHC 2 7 M10 Flat Washer 8 9 M10 Nylock Nut 4 10 M10 X 75L SHC 4 11 Connecting Tube 1 9 7 10 Torque all to: 77 N-m/57 ft-lbs.
ASSEMBLY PART 2: CAM/CABLE ASSEMBLY STEP 1 | CAM & CABLE ASSEMBLY INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 7 M10 Flat Washer 1 9 M10 Nylock Nut 1 12 M10 X 110L SHC 1 13 Large Pivot Cap 1 14 CAM 1 15 Weight Stack Cable 1 Assemble CAM as shown, locating the larger CAM away from the weight stack. Tighten to 77 N-m/57 ft-lbs. 13 14 9 12 7 Separate CAM to assemble weight stack cable as shown. Capture cable with forked clip and orient as shown. Tighten to 16 N-m/142 in-lbs.
ASSEMBLY PART 2: CAM/CABLE ASSEMBLY STEP 2 | USER FRAME CABLE INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 7 M10 Flat Washer 2 9 M10 Nylock Nut 1 16 M10 X 50L SHC 1 17 Pulley 1 18 User Frame Cable (Preassembled to CAM) 1 16 9 7 17 18 Torque to: 77 N-m/57 ft-lbs.
ASSEMBLY PART 2: CAM/CABLE ASSEMBLY STEP 3 | SWINGARM ASSEMBLY INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 7 M10 Flat Washer 1 9 M10 Nylock Nut 1 19 Swingarm 1 20 Small Pivot Cap 1 21 M10 X 105L SHC 1 22 M6 Nylock Nut 1 23 M6 Shoulder Bolt 1 20 9 21 7 19 22 23 Tighten M10 to 77 N-m/57 ft-lbs. Assemble cable into swingarm and tighten M6 to 16 N-m/142 in-lbs.
ASSEMBLY PART 3: ARM ASSEMBLY STEP 1 | PIVOT BLOCK ASSEMBLY INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 24 M10 X 55L SHC 4 25 Pivot Block Assembly 1 24 Hand thread M10 bolts and leave loose ***Note: Pivot Block is symmetrical*** 25 Axles must be red Loctited (Loctite 272) and torqued to: 180 N-m/133 ft-lbs.
ASSEMBLY PART 3: ARM ASSEMBLY STEP 2 | TIE ROD TO SWINGARM ASSEMBLY INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 26 M6 X 12L SHC (Right Side Not Shown) 2 27 M6 Flat Washer (Right Side Not Shown) 2 28 Tie Rod (Right Side Not Shown) 2 Torque to 16 N-m/142 in-lbs.
ASSEMBLY PART 3: ARM ASSEMBLY STEP 3 | LEFT AND RIGHT* ARM ASSEMBLY INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 20 Small Pivot Cap 2 29 M10 X15L SHC 1 30 Snap Ring 2 31 Left Arm 1 32 Wave (Spring) Washer 2 33 Right Arm 1 *Only left arm is shown Apply blue Loctite 242 and tighten to 77 N-m/57 ft-lbs.
ASSEMBLY STEP 4 | TIE ROD TO ARM ASSEMBLY INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 26 M6 X 12L SHC (Left Side Not Shown) 2 27 M6 Flat Washer (Left Side Not Shown) 2 PART 3: ARM ASSEMBLY Torque to 16 N-m/142 in-lbs.
ASSEMBLY STEP 5 | COUNTER WEIGHT ASSEMBLY INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 34 Counter Weight 2 35 M8 Flat Washer 4 36 M8 X 15L SHC 4 34 22 35 36 PART 3: ARM ASSEMBLY Torque to: 39 N-m/29 ft-lbs.
ASSEMBLY PART 3: ARM ASSEMBLY STEP 6 | ARM POSITIONING INSTRUCTIONS & NOTES Before fully tightening the pivot block, ensure that the arms are symmetrical about the centerline of the machine. The left and right hand grips should be centered to the user. Tighten pivot block to 77 N-m/57 ft-lbs. Tighten four bolts of pivot block, and then back out one bolt to apply red Loctite 272, replace bolt to proper torque. Repeat steps for three remaining bollts.
ASSEMBLY PART 4: PAD ASSEMBLY STEP 1 | THIGH PAD ASSEMBLY INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 35 M8 Flat Washer 2 37 Axle 1 38 M8 X 25L SHC 2 39 Thigh Pad Assembly 1 37 39 35 38 24
ASSEMBLY PART 4: PAD ASSEMBLY STEP 2 | BOTTOM PAD ASSEMBLY INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 40 Pad 1 41 M10 X 20L BHC 4 Install the pad as shown. Tighten to 27 N-m/20 ft-lbs.
ASSEMBLY PART5:PLASTICSASSEMBLY STEP 1 | SHROUD ASSEMBLY ASSEMBLY INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 42 Left Front Shroud 1 43 Right Front Shroud 1 44 Rear Shroud 1 42 43 Install the weight stack shrouds as shown.
ASSEMBLY PART5:PLASTICSASSEMBLY STEP 2 | TOP CAP ASSEMBLY INSTRUCTIONS & NOTES ID DESCRIPTION QUANITY 45 M8 X 60L SHC 4 46 Top Cap 1 45 46 I M PO RTA NT NOTI CE Install the top cap and connect rep counter plug as shown. Torque to 17 N-m/147 in-lbs. Position top cap so Rep Counter faces the user. PLEASE NOTE: Be sure to remove the insulating sheet when installing the Rep Counter.
Matrix Fitness 1600 Landmark Drive Cottage Grove WI 53527 matrixfitness.com Toll-free 866.693.4863 Facsimilie 608.839.8687 ULTRA Lat Pulldown Owners Guide rev.1.
