T7-T5_Treadmills_r2.5.
TABLE OF CONTENTS CHAPTER 1: IMPORTANT SAFETY INSTRUCTIONS 1.1 1.2 1.3 1.4 1.5 PAGES Before Getting Started .................................................................................................... Proper Usage ................................................................................................................. Read and Save These Instructions ................................................................................... Electrical Requirements ..........................
CHAPTER 1: Important Safety Instructions 1.1 BEFORE GETTING STARTED It is the sole responsibility of the purchaser of Matrix Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel, on proper usage of the equipment. When using an electrical product, basic precautions should always be followed including the following: It is recommended that all users of Matrix Fitness Systems exercise equipment be informed of the following information prior to its use.
CHAPTER 1: Important Safety Instructions CHAPTER 2: Preventative Maintenance 1.4 ELECTRICAL REQUIREMENTS 2.1 RECOMMENDED CLEANING TIPS For your safety and to ensure good treadmill performance, the ground on this circuit must be non-looped. Please refer to NEC article 210-21 and 210-23. Your Treadmill is provided with a power cord with a plug listed below and requires the listed outlet. Any alterations of this power cord could void all warranties of this product. 1. 2. 3. 4. 5. 6. 7.
CHAPTER 2: Preventative Maintenance 2.4 ADJUSTING THE BELT CHAPTER 3: Serial Number Location T5x, T7x, T7xe TREADMILL After placing the treadmill in the position it will be used, the belt must be checked for proper tension and centering. The belt might need to be adjusted after the first two hours of use. Temperature, humidity, and use cause the belt to stretch at different rates. If the belt starts to slip when a user is on it, be sure to follow the directions below.
CHAPTER 4: T5x Overlay And Workout Description 4.1 T5x CONSOLE DESCRIPTION The MATRIX treadmill is inspected before it is packaged. It is shipped in four pieces: the base, the upright console supports, the handlebar and the console. Carefully unpack the unit and dispose of the box material. WORKOUT KEYS: Simple program view and selection buttons. Press Fitness Test button to cycle through available tests. QUICK START/GO: One touch Start and Quick Start. ENTER: To confirm each program setting.
CHAPTER 4: T7x Overlay And Workout Description T7x CONSOLE DESCRIPTION The MATRIX treadmill is inspected before it is packaged. It is shipped in four pieces: the base, the upright console supports, the handlebar and the console. Carefully unpack the unit and dispose of the box material. MULTI-PURPOSE KEYS: Keys have different functions depending on each screen. QUICK START/GO: One touch Start and Quick Start. ENTER: To confirm each program setting. UP/DOWN INCLINE: Easy information and incline selection.
CHAPTER 4: T7xe Overlay And Workout Description T7xe CONSOLE DESCRIPTION The MATRIX treadmill is inspected before it is packaged. It is shipped in four pieces: the base, the upright console supports, the handlebar and the console. Carefully unpack the unit and dispose of the box material. The T7xe has a full integrated touch screen display. All information required for workouts is explained on screen. Exploration of the interface is highly encouraged.
CHAPTER 4: T5x, T7x, T7xe Overlay And Workout Description 4.2 MANUAL WORKOUT OPERATION QUICK START OPERATION Press the GO or QUICK START button(s) and the treadmill will enter into a manual mode of operation. All energy expenditure values will be calculated using the default wight measurement. MANUAL WORKOUT OPERATION Manual is a workout that allows you to manually adjust the speed and incline values at anytime.
CHAPTER 4: T5x, T7x, T7xe Overlay And Workout Description 4.5 FITNESS TEST WORKOUT OPERATION Your Matrix treadmill offers a variety of fitness tests-the Gerkin firefighter protocol, the WFI firefighter protocol, the Army, Navy, USMC, and USAF as well as the Physical Efficiency Battery (PEB). The Gerkin protocol was developed by Dr. Richard Gerkin of the Phoenix (Arizona) Fire Department.
CHAPTER 4: T5x, T7x, T7xe Overlay And Workout Description 4.5 FITNESS TEST WORKOUT OPERATION CARDIOVASCULAR FITNESS PERCENTILES Males: SUPERIOR EXCELLENT GOOD FAIR POOR VERY POOR VO2 max (ml/kg/min) 20-29 30-39 40-49 50-59 >58.8 >58.9 >55.4 >52.5 54.0 52.5 50.4 47.1 51.4 50.3 48.2 45.3 48.2 46.8 44.1 41.0 46.8 44.6 41.8 38.5 44.2 42.4 39.9 36.7 42.5 41.0 38.1 35.2 41.0 38.9 36.7 33.8 39.5 37.4 35.1 32.3 37.1 35.4 33.0 30.2 34.5 32.5 30.9 28.0 31.6 30.
CHAPTER 5: T5x, T7x, T7xe Treadmill Specifications, Parts, and Assembly Guides 5.1 T5x, T7x, T7xe MODEL SPECIFICATIONS T7xe Treadmill T7x Treadmill T5x Treadmill Features Deck Type Ultimate™ Hard-Wax reversible 1” deck Ultimate™ Hard-Wax reversible 1” deck Ultimate™ Hard-Wax reversible 1” deck Belt Type Habisat - 2-ply commercial grade Habisat - 2-ply commercial grade Habisat - 2-ply commercial grade Running area 60” x 22” 60” x 22” 60” x 22” Deck Step Height 9.5” 9.5” 9.
CHAPTER 5: T5x, T7x, T7xe Treadmill Specifications, Parts, and Assembly Guides 5.2 T5x, T7x, T7xe MODEL REQUIRED FASTENERS & ASSEMBLEY TOOLS Part #: Part Name: 10 020090-00 14 Dimensions: Quantity: Bag Color: Socket head cap screw M8 x 20mm 10 Black 0000086571 Flat Washer 6.2 x 12 x 1.6 10 Black 20 0000084935 Left Connection Bracket SPHC 4.0T 1 21 0000084936 Right Connection Bracket SPHC 4.0T 1 11 004541-AC Socket Head Cap Screw M8 x 1.
CHAPTER 5: T5x, T7x, T7xe Treadmill Specifications, Parts, and Assembly Guides 5.3 T5x, T7x, T7xe MODEL ASSEMBLY STEPS • ATTENTION After assembly and installation is complete the treadmill will need to be calibrated using the auto-calibration feature found in the manager mode screen. Please refer to the Matrix treadmill service manual for instructions on how to enter management mode. DO NOT stand on the belt while the auto-calibration sequence is in progress.
CHAPTER 6: T5x, T7x, T7xe Treadmill Specifications, Parts, and Assembly Guides 5.3 T5x, T7x, T7xe MODEL ASSEMBLY STEPS STEP 3 STEP 4 12 14 21 12 14 11 21 20 11 20 19 17 19 17 Open White Assembly Bag. Assemble the left and right bracket-items 20 and 21 to the console base using item 12-socket head cap screw, item 14-flat washer and item 11-socket head cap screw. Open Blue Assembly Bag. Slide the urethane arms over the steel tubes on the console base.
CHAPTER 5: T5x, T7x, T7xe Treadmill Specifications, Parts, and Assembly Guides 5.3 T5x, T7x, T7xe MODEL ASSEMBLY STEPS 14 15 STEP 5 STEP 6 14 15 23 13 14 15 23 13 23 16 23 16 23 13 Open Red Assembly Bag. Assemble the console base to the console masts using item 15-button head cap screw and item 14-flat washer. Be sure to route the console cables down the console mast through the larger opening in the mast which is closest to the running belt.
CHAPTER 5: T5x, T7x, T7xe Treadmill Specifications, Parts, and Assembly Guides 5.3 T5x, T7x, T7xe MODEL ASSEMBLY STEPS STEP 7 STEP 8 22 18 22 18 Open Green Assembly Bag. Install the power cord and assemble item 18-power cord holder with item 22-button head screw. If your hardware pack is missing item 22, check to see if the screws are already assembled on the treadmill. Replace the motor cover(s) and power the treadmill unit on. The power button is located next to the power cord inlet.
CHAPTER 5: T5x, T7x, T7xe Treadmill Specifications, Parts, and Assembly Guides 5.4 T5x, T7x, T7xe MODEL ASSEMBLY STEPS OPTIONAL LEVELING ASSEMBLY TECHNIQUES: Use of shim or adding leveling foot. NOTE: It is extremely important that the levelers are correctly adjusted for proper operation. An unbalanced unit may cause belt misalignment or other issues. Use of all level is recommended. Remove the leveling shim provided on the underside of the treadmill.
M AT R I X F I T N ESS | 1 60 0 L A N D M A R K D R I V E COT TAG E G ROV E W I 53 527 USA To l l Fre e 8 6 6 . 693.4 8 63 m a t r i x f i t n e ss . co m Fa x 60 8 . 8 3 9. 8 687 PA RT # 0 0 0 0 09 5 1 4 0 REV. 2.5 T7-T5_Treadmills_r2.5.