Service manual

80
11.1 SOFTWARE UPGRADE INSTRUCTIONS - CONTINUED
5) When the update is complete, the display will ask you to remove the USB drive (Figure E). Once the USB drive is removed, the treadmill
will reboot automatically.
6) Press ENTER, 1, 0, 0, 1, ENTER to access Manager Mode. Then press the button next to ABOUT (Figure F).
7) Press the button next to VERSION to double check the new software revision (Figure G).
8) All of the software vision information will now be displayed (Figure H).
FIGURE H
FIGURE F
FIGURE G
FIGURE E
CHAPTER 11: SOFTWARE UPGRADE GUIDE