Service manual

79
11.1 SOFTWARE UPGRADE INSTRUCTIONS
1)FivefilesshouldbepresentontheUSBdrive.TheseareSirF7xAll.cab,NK,IO_XXX,updateLMM.cofige,andExtract_CE.
2) Turn on the treadmill power, and then wait until the standard display picture comes up (Figure A).
3) Insert the USB flash drive into the USB port in the console (Figure B).
4) After a few seconds, the treadmill will auto run the upgrade processing (Figure C). The achieved percentage of the scheduled process will
be displayed in the middle of the display (Figure D).
FIGURE A
FIGURE B
FIGURE C FIGURE D
CHAPTER 11: SOFTWARE UPGRADE GUIDE