Manualshelf

Service manual

ManualsBrandsMatrix ManualsSport & travelT7x
71727374757677787980
75
10.5 ENTERING THE SERIAL NUMBERS INTO THE CONSOLE
ONCE INSTALLATION IS COMPLETE, THE CONSOLE AND PLATFORM SERIAL NUMBERS SHOULD BE
ENTERED INTO THE CONSOLE.
1) Press ENTER, 3, 0, 0, 1, ENTER on the upper number keypad and Service Mode will appear on the display.
2) Press Setup on the display.
2) Press Serial Number on the display.
3) Choose Platform (Figure A) or Console (Figure B).
4)EntertheserialnumberoftheconsoleorplatformusingtheuppernumberkeypadandthenpressOK.Onlythefinal9digitsoftheserial
number should be entered.
5) Repeat this procedure so that both the console and platform serial numbers are entered.
6)PresstheEMERGENCYSTOPortheBACKandHOMEkeystoreturntonormalfunction.
FIGURE A
FIGURE B
CHAPTER 10: TREADMILL SPECIFICATIONS AND ASSEMBLY GUIDE