T50x / T50x-U TREADMILLS OWNER’S MANUAL
TABLE OF CONTENTS CHAPTER 1: IMPORTANT SAFETY INSTRUCTIONS 1.1 1.2 1.3 1.4 1.5 PAGES Before Getting Started .................................................................................................... Proper Usage ................................................................................................................. Read and Save These Instructions ................................................................................... Electrical Requirements ..........................
CHapter 1: Important Safety Instructions 1.1 Before getting Started It is the sole responsibility of the purchaser of Matrix Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel, on proper usage of the equipment. When using an electrical product, basic precautions should always be followed including the following: DANGER CHapter 1: Important Safety Instructions 1.4 Electrical Requirements 2.
CHapter 2: Preventative Maintenance CHapter 3: Serial Number Location 4.1 T50x Console description T50x, T50x-U TREADMILL 2.4 ADJUSTING THE BELT CHapter 4: Overlay And Workout Description After placing the treadmill in the position it will be used, the belt must be checked for proper tension and centering. The belt might need to be adjusted after the first two hours of use. Temperature, humidity, and use cause the belt to stretch at different rates.
CHapter 4: Overlay And Workout Description 4.2 T50x-U Console description CHapter 4: Overlay And Workout Description Use the WORKOUT KEYS to enter the program, or use RIGHT / LEFT arrow keys to scroll to the desired program. The program name is displayed in the PROMPT AREA. Use the RIGHT / LEFT ARROW keys to scroll to desired parameter values displayed in the PROMPT AREA. Press the ENTER key to confirm each selection. Follow the steps to set up each workout.
CHapter 4: T50x, T50x-U Overlay And Workout Description CHapter 4: T50x, T50x-U Overlay And Workout Description GOAL+ HEARTRATE+ 4.6 FitNESS test WORKOUT OPERATION (A) TIME GOAL TARGET HR & WEIGHT LOSS The tables below list Fit Test and Cooper Test results. 1. 1. FIT TEST’S RESULT FOR MALE 2. 3. 4. 5. 6. Press the “GOAL+” key and use the RIGHT / LEFT ARROW keys to select “TIME GOAL”. “SELECT TIME” using the RIGHT / LEFT ARROW keys, and then press ENTER.
CHapter 5: T50x, T50x-U Treadmill Specifications, Parts, and Assembly Guides and Assembly Guides 5.2 T50x, T50x-U Model Required fasteners & Assembley Tools 5.
CHapter 5: T50x, T50x-U Treadmill Specifications, Parts, and CHapter 5: T50x, T50x-U Treadmill Specifications, Parts, Assembly Guides and Assembly Guides 5.3 T50x, T50x-U Model ASSEMBLY STEPS 5.2 T50x, T50x-U Model Required fasteners & Assembley Tools ASSEMBLY EXPLODED DIAGRAM • ATTENTION After assembly and installation is complete the treadmill will need to be calibrated using the AUTO-CHECK feature found in the manager mode screen.
CHapter 5: T50x, T50x-U Treadmill Specifications, Parts, and Assembly Guides 5.3 T50x, T50x-U Model ASSEMBLY STEPS CHapter 5: T50x, T50x-U Treadmill Specifications, Parts, and Assembly Guides 5.3 T50x, T50x-U Model ASSEMBLY STEPS STEP 2 STEP 3 Z52 Z52 N03 N06 N04 Connect the console cables from the console set to the motor control board cables. Secure the console set with 2 screws (Z52) on each side. 14 N07 Put the foam armrests (N03, N04) into the armrest frame.
CHapter 5: T50x, T50x-U Treadmill Specifications, Parts, and CHapter 5: T50x, T50x-U Treadmill Specifications, Parts, Assembly Guides 5.3 T50x, T50x-U Model ASSEMBLY STEPS and Assembly Guides 5.3 T50x, T50x-U Model ASSEMBLY STEPS Assembly is completed and the auto-calibration sequence must be run at this time. STEP 4 Z54 Z53 1. 2. 16 Connect the speed and incline Swift Controls™ cables with the control panels.
M ATrix F itness systems corp. 1 6 0 0 Landmark D rive C ottage Grove wi 5 3 5 2 7 U S A T O L L F R E E 8 6 6 . 6 9 3 . 4 8 6 3 w w w. m a t r i x f i t n e s s . c o m FA X 6 0 8 . 8 3 9 . 8 6 8 7 REV. 1.
