User`s manual

4.6 User-defined character commands

4.6.1 ESC % n

[Name]: Select/cancel user-defined character

[Format]: ASCII ESC % n

Hexadecimal 1B 25 n

Decimal 27 37 n

[Range]: 0 ≤ n ≤ 255

[Description]: Select or cancel user-defined character set.

When n (LSB)=0，cancel user-defined character set.

When n (LSB)=1，select user-defined character set.

[Notice]:

• When cancel user-defined character set, auto select

built-in character set. It still can use if won’t delete the defined

characters.

• n only LSB is available.

[Default] n = 0

[Reference] ESC &, ESC ?

4.6.2 ESC & y c1 c2 [x1 d1...d(y *x1)]...[xk d1...d(y * xk)]

[Name]：Define user-defined character

[Format]: ASCII ESC & y c1 c2 [x1 d1...d(y ´

x1)]...[xk d1...d(y ´ xk)]

Hexadecimal 1B 26 y c1 c2 [x1 d1...d(y ´

x1)]...[xk d1...d(y ´ xk)]

Decimal 27 38 y c1 c2 [x1 d1...d(y ´

x1)]...[xk d1...d(y ´ xk)]