User`s manual

• Transmit [ n] k in ascending order and place a NUL code 0

at the end.

• When [ n] k is less than or equal to the preceding value [ n]

k-1, tab setting is finished and the following data is processed

as normal data.

• ESC D NUL cancels all horizontal tab positions.

• The previously specified horizontal tab positions do not

change, even if the character width changes.

• The character width is memorized for each standard and

page mode. [Default] The default tab positions are at

intervals of 8 characters (columns 9, 17, 25,...) for font A (12 ´

24).

[Reference] HT

4.3.3 ESC \ nL nH

[Name]: Set relative printing position

[Format]: ASCII ESC \ nL nH

Hexadecimal 1B 5C nL nH

Decimal 27 92 nL nH

[Range]: 0 ≤ nL ≤ 255; 0 ≤ nH ≤ 1.

[Description]: Sets the print starting position based on the

current position by using the horizontal or vertical motion unit.

This command sets the distance from the current position to

n [( nL + nH × 256)horizontal motion unit]

[Notice]:

• Any setting that exceeds the printable area is ignored.