Specifications

43
9.12 CONSOLE REPLACEMENT
1) Turn off power to the treadmill and disconnect the power cord.
2) Remove the four 6 mm screws from underneath the console (Figure A).
3) Disconnect the 4 electrical connectors to the console.
4) Remove the console (Figure B).
5) Reverse Steps 1-4 to install a new console. NOTe: Be sure to plug in the 4 wires disconnected in Step 3 (Figure C).
6) Test the treadmill for function as outlined in Section 9.21.
FIGURE A FIGURE B
FIGURE C
CHAPTER 9: PART REPLACEMENT GUIDE