S3x_OM_090507.
S3x_OM_090507.
1.1 1.2 1.3 1.4 CHAPTER 1: IMPORTANT SAFETY INSTRUCTIONS PAGES Read and Save These Instructions .................................................................. Setting up the Stepper .................................................................................. Installation Requirements .............................................................................. Preventative Maintenance and Cleaning Tips ...................................................
S3x_OM_090507.
CHAPTER 1: Important Safety Instructions 1.1 READ AND SAVE THESE INSTRUCTIONS • This stepper is intended for commercial use • To insure your safety and protect the equipment, read all instructions before operating the MATRIX Stepper. • Unsupervised Children must be kept away from this equipment When using an electrical product, basic precautions should always be followed, including the following: • Always unplug this equipment from the electrical outlet immediately after using and before cleaning.
CHAPTER 1: Important Safety Instructions CHAPTER 2: Using Manager Preference 2.1 USING MANAGER PREFERENCE MODE Your Matrix Stepper is designed to allow you to customize settings for your preferences and diagnostics. The Manager Mode can only be accessed while the Stepper is powered up. Follow the instructions to adjust the Stepper computer to your desired setting. STEP 1: Power up the Stepper and hold the UP and DOWN ARROW KEYS for 3 seconds.
CHAPTER 2: Using Manager Preference CHAPTER 3: Serial Number Location 2.2 USING CSAFE Matrix is the leader in entertainment availability. On the back of the console are two RJ45 receptacles. They are marked CSAFE and ENTERTAINMENT. Use the CSAFE port to plug in a CSAFE device using an RJ45 connector. The connection is as follows: SERIAL # PLACEMENT 2.3 USING (BACK SIDE) ACCESS LAYOUT: SERIAL# PLACEMENT Below is a layout to all of the access ports on the back of your Matrix Console.
CHAPTER 4: Using The Stepper 4.1 PAUSING THE UNIT 4.3 MANUAL OPERATION Once you stop stepping, your console has a 30 second pause feature. You will know that the machine is paused because the console will display a bouncing green dot. If the dot is not displayed, the 9-volt battery located in the back of the console needs to be replaced. Simply remove the screw to access the battery compartment and replace the 9-volt battery. Use the programs with the touch of a button. 4.
CHAPTER 4: Using The Stepper 4.
CHAPTER 4: Using The Stepper 4.6 HEART RATE CONTROL 4.7 CONSTANT WATTS For your convenience, Matrix Fitness Stepper come standard with digital contact heart rate sensors and are Polar® telemetry compatible. CONSTANT WATTS program is a unique program that allows you to vary your cadence and the Stepper’s resistance will adjust accordingly to your selected goal. Locate the metal sensors in the handrail. Notice there are two separate pieces of metal on each grip.
CHAPTER 5: Stepper Specifications, Parts, and Assembly Steps S3x-01 Power Requirements 120V/220V 7 S3x_OM_090507.
CHAPTER 5: Stepper Specifications, Parts, Z11 and Assembly Steps SOCKET HEAD CAP SCREW M8 x 25 8 S3x_OM_090507.
CHAPTER 5: Stepper Specifications, Parts, and Assembly Steps 9 S3x_OM_090507.
CHAPTER 5: Stepper Specifications, Parts, and Assembly Steps Z11 Water Bottle Holder 10 S3x_OM_090507.
CHAPTER 5: Stepper Specifications, Parts, and Assembly Steps 11 S3x_OM_090507.
CHAPTER 5: Stepper Specifications, Parts, and Assembly Steps 12 S3x_OM_090507.
M AT R I X F I T N E S S S Y S T E M S C O R P. 1 6 1 0 L A N DM A R K D R I V E C O T TA G E G R O V E W I 5 3 5 2 7 U S A TOLL FREE 866.693.4863 w w w. m a t r i x f i t n e s s . c o m FA X 6 0 8 . 8 3 9 . 8 6 8 7 PA RT # 0 0 0 0 0 9 2 4 9 5 REV. 1.3 S3x_OM_090507.
