Specifications

Matrix SETU ATA211 System Manual 77
Configuring Dialed Number Table
If you have not already configured the Dialed Number Table for the FXS port, you may do so now.
1. Login as Admin with your Password.
2. Click the Advanced Settings link on the left pane to expand.
3. Click Dialed Number Table.
The Dialed Number Table page opens.
4. For each Index number,
• Enter the desired Number you want to store in the table. The number must not exceed 24 characters;
all ASCII characters are allowed.
• For the number you entered, define the Minimum Digits, which the system should wait to receive
before considering it as a valid number. Default:
• For the number you entered, define the Maximum Digits, which the system should wait to receive
before considering it as End of Dialing. Default:
• For the number you entered, select as Destination Route the port the system should use to call the
dialed number. Default: SIP 1
If no Destination Route is selected (‘None’) for an entry, the system will reject the call, even if a match
is found for the dialed number in this table.