Specifications

62 Matrix SETU ATA211 System Manual
You will need to configure NAT as Routing Mode, when the SETU ATA211 is at the edge of the network
and multiple hosts are connected behind ATA, and you want to share a common internet connection
between all hosts.
• Select Bridge as Routing Mode, if the LAN and WAN port of SETU ATA are in the same network
segment.
Selecting Bridge mode will disable Network Address Translation (NAT) on the WAN port.
When you set SETU ATA211 in Bridge Mode, you need not configure the LAN port IP Address and Subnet
Mask. The WAN and the LAN port of SETU ATA211 can be accessed with the IP Address of the WAN port.
LAN
The LAN port of SETU ATA211 is used for connect a standalone computer or a LAN Switch.
If you need to change the IP Address or the Subnet Mask of the LAN Port of SETU ATA211, you may do so now.
Default IP Address of the LAN Port is: 192.168.002.006
Default Subnet Mask of the LAN Port is: 255.255.255.0