Specifications

50 Matrix SETU ATA211 System Manual
2. You can assign a Name to the FXS port, which will be displayed to the called party (if the instrument of the
called party supports display name functionality).
The name you assign may consist of a maximum of 24 characters. Default: Blank
3. You can assign a Number to the FXS port. In case of Peer to Peer calls this number will be displayed to
the called party.
The length of the number string may have a maximum of 24 characters. Default: Blank.
Outgoing Calls
1. Select an appropriate Outgoing Call Routing option on the FXS port. Default: Route all calls from SIP1.
• Select Don't allow outgoing calls, if you do not want to route calls through the FXS port.
• Select Route all calls from SIP1, if you want all outgoing calls from the FXS port to be routed through
SIP Trunk 1.
• Select Route all calls from SIP2, if you want all outgoing calls from the FXS port to be routed through
SIP Trunk 2.
• Select Route all calls from SIP3, if you want all outgoing calls from the FXS port to be routed through
SIP Trunk 3.
• Select Route all calls from FXO, if you want all outgoing calls from the FXS port to be routed through
the FXO port.
• Select Route all calls as per Dialed Number Table, if you want specific numbers to be routed though
specific SIP Trunks only. If you select this option, you must configure the Dialed Number Table. To do
this,