Specifications

46 Matrix SETU ATA211 System Manual
• The Automatic Number Translation table opens in a new window.
In this table, you can store as many as 24 Dialed Numbers and their corresponding Substitute
Numbers, at Index Numbers 01 to 24.
• In the Dialed Number column, enter the numbers that need to be modified when dialed out from the
FXO port.
• In the Substitute Number column, enter the numbers which the system should dial out in place of the
dialed numbers.
Make sure you enter a Dialed Number and its corresponding Substitute Number at the same Index
number in the table. For example, if you entered 001 as Dialed Number at Index 01, you must enter its
corresponding Substitute Number 1 also at Index 01.
• Click Submit to save your entries.
• Close the window.
5. Select the CLI Type from the options according to the type supported by your CO network:
•DTMF
• FSK, during ring
• FSK, before ring
Default: DTMF
6. Select the appropriate Dial Type option as supported by your CO Network. You can select either Pulse or
Tone. Default:Tone
7. If you have selected the Dial Type as Pulse, you must set the Pulse Dial Ratio as per your country. You
can select the required pulse dial ratio from the following options: 40:60, 50:50 and 33:67. Default: 50:50.