Specifications

Matrix SETU ATA211 System Manual 41
• For calls made from the FXS port, select the destination route for the option If dialed number
does not match with either of the programmed number in the Dialed Number Table & call
is made from FXS, route the call through. Default: SIP Trunk 1.
• For calls made from the FXO port, select the destination route for the option If dialed number
does not match with either of the programmed number in the Dialed Number Table & call
is made from FXO, route the call through. Default: SIP Trunk 1.
• Click Submit and close the window. To know more see “Dialed Number Table”.
4. Enter the time duration in the Ring Timer field, for which the ring should be played on the FXO Port for an
incoming call. Range of the ring timer is of 01 to 99 seconds. Default: 45 sec.
5. If you want to Authenticate Incoming Calls on FXO port, that is you want to allow incoming calls only
after callers have authenticated themselves, enable PIN Authentication. Default: Disabled.
You must configure the PIN Authentication Table. To do this,
• Click the arrow icon.