Specifications

38 Matrix SETU ATA211 System Manual
The name you assign may consist of a maximum of 24 characters.
Incoming Call
1. Select an appropriate Incoming Call Routing option for the FXO Port. Default: Route to FXS. You may
select:
• Ignore Incoming Calls: Select this option, if you do want to receive incoming calls on FXO port of
ATA211.
• Route to FXS: The system will place all calls received on the FXO port on the FXS port. The phone
connected to the port will start ringing for the duration of the Ring Timer (default: 45 seconds). If the call
is not answered within this timer, it will be rejected.
If you select this option, you may configure the Ring Timer. Valid range: 01-99 sec.
• Route to fixed destination number as per incoming call route selection: The system will place all
calls received on the FXO Port to a Fixed Destination Number as per the Incoming Call Route you
select: SIP1, SIP2, SIP3 or Dialed Number Table.
If you select this option, define the destination number in the Fixed Destination Number field and
select the Incoming Call Route.
• Route to FXS. If not answered within ring timer, route to fixed destination number as per
incoming call route selection: The system will route all calls received on the FXO Port to the FXS
port. The phone connected to the FXS port will start ringing for the duration of the Ring Timer (default:
45 seconds). If the call is not answered within this timer, the call will be automatically routed to the
Fixed Destination number as per the Incoming Call Route you select: SIP1, SIP2, SIP3 or Dialed
Number Table.
If you select this option, define the destination number in the Fixed Destination Number field and
select the Incoming Call Route.
• Answer the call, collect number & route as per incoming call route selection: Select this option, if
you want the system to first answer the call on the FXO port, play dial tone to the caller, and when the
caller dials the number, to collect the digits dialed by the caller and route the call as per the incoming
call route you select i.e SIP1, SIP2, SIP3 or Dialed Number Table.
If you select this option, select the Incoming Call Route.