Specifications

Matrix SETU ATA211 System Manual 37
FXO Port
SETU ATA211 supports a FXO Port,
• which may be interfaced with the analog trunk from PSTN and used to route incoming calls to FXS port or
SIP trunks.
• which may be interfaced with FXS port of the PBX.
To configure the FXO port parameters,
1. Click the link FXO.
2. Click More button to view all parameters on this page.
General
1. Select the Enable check box to use the FXO Port. Default: Disabled.
You may disable the FXO Port, if you do not want to include it in Call Routing.
2. You can assign a Name to the FXS port, which will be displayed to the called party (if the instrument of the
called party supports name display name functionality). Default: Blank