Specifications

26 Matrix SETU ATA211 System Manual
• the Click Submit to save entries.
• Close the window.
3. Enter the SIP ID. This is the ID which remote parties will use to call this SIP Trunk. Default: Blank.
The SIP ID may be a number or text consisting of a maximum of 40 characters.
If you have defined the trunk mode as Proxy, enter the SIP ID provided by your ITSP. For example, if SIP
URI provided by the ITSP is [e-mail], enter 12345 in this field.
If you have defined the trunk mode as Peer-to-Peer, enter the desired SIP ID.
4. Enter Authentication ID. Default: Blank.
If you have defined the SIP trunk mode as Proxy, enter the Authentication ID (User ID) provided by your
ITSP.
If you have defined the trunk mode as Peer-to-Peer, enter the ID of your preference as Authentication ID.
5. Enter Authentication Password. Default: Blank.
If you have defined the SIP trunk mode as Proxy, enter the Authentication Password provided by your
ITSP.
If you have defined the trunk mode as Peer-to-Peer, enter a password of your preference as
Authentication Password.
6. SIP Registration is applicable for Proxy SIP Trunks only. Default: Disabled.
Select the check box to enable. SETU ATA211 will send the REGISTER message to Registrar proxy or
Outbound proxy as applicable.
7. Select the OG Calls without Registration check box to allow the users to make outgoing calls
irrespective of whether the SIP Trunk has been successfully registered with proxy or not.
By default, the system does not allow outgoing calls to be made if the status of the SIP trunk is 'not
registered'.
8. If you have defined the SIP trunk mode as Proxy, in the Registrar Server Address: Port field, enter the
Registrar Server Address and the Registrar Server’s listening port for SIP messages.
The registrar server address may be an IP address or a domain. Default: Blank.
The valid port range is: 1024-65534. Default: 5060.
9. If your service provider uses an outbound proxy for handling voice calls, enable Outbound Proxy check
box.
• In the Outbound Proxy Server Address: Port field, enter the IP address or domain name of the
Outbound Proxy Server and the number of the Outbound Proxy Server’s Listening Port for SIP.
The Server Address may consist of maximum 40 characters. Default: Blank.