Specifications

24 Matrix SETU ATA211 System Manual
Trunks Settings
1. Select the check box Enable to use the SIP Trunk. Default: Disabled.
You may disable the SIP trunk, if you do not want to include it in Call Routing.
2. Select SIP Trunk Mode according to your installation. Default: Peer-to-Peer.
• Select Proxy, if you want to register this SIP trunk with an ITSP or a Registrar Server.
• Select Peer-to-Peer, if you want to use the trunk for Peer-to-Peer (non-proxy) calls.
If you select Peer-to-Peer, you must also configure the number strings in the Peer-to-Peer Table.
• Click the arrow icon to configure the Peer-to-Peer Table. A new window opens.