Specifications

22 Matrix SETU ATA211 System Manual
6. To synchronize Date and Time of SETU ATA211 with that of the country where it is installed, select Time
Zone from the drop down list. Default: (GMT+05:30) Kolkata, Chennai, Mumbai, New Delhi.
7. To use a public internet time server for date and time synchronization, select an internet based time server
as NTP Server. You may select any of the three reliable public internet time servers
1
supported by SETU
ATA211:
• ntp1.cs.wisc.edu
• time.windows.com
• time.nist.gov
Default: Ntp1.cs.wisc.edu
If you want to use an NTP server other than these, select the radio button and enter the IP Address/
domain of the server in the empty field.
When you reset SETU ATA211 to factory defaults, Date and Time settings will not be set to default.
8. Click Submit to save your region settings.
1. You can select from three free, reliable public internet time servers run by the University of Wisconsin-Madison, Microsoft, and the
National Institute of Standards and Technology (NIST), to obtain date and time. You can also configure an NTP time server of your
preference, other than these. These public internet time servers provide time offset from the Greenwich Mean Time (GMT), and you
can select the time according to the time zone of the country you are installing the SETU ATA211. For instance, if your SETU ATA211
is installed in India, you can select the time zone for India (GMT+5.30 Calcutta, Chennai, Mumbai, and New Delhi). The time for India
is offset from GMT by +5.30 hours. Similarly, if your SETU ATA211 is installed in Hawaii, select the time zone for Hawaii, which is off-
set by GMT -10:00 hours, to set the correct time and date.