Specifications

Matrix SETU ATA211 System Manual 17
• Dial the Admin Password (default: 1234).
You will get programming tone.
• Dial the System Command for the feature/facility you want to configure.
For example:
To change IP Address of the LAN Port dial 12<LAN IP Address>#*
For example, to change the IP address to 192.168.1.120, dial 12192168001120#*
• When you dial a valid command, SETU ATA211 plays a confirmation tone for 3 seconds, and plays the
programming tone.
•Dial 0 to exit configuration mode.
When network parameters are changed, SETU ATA211 will restart, without dial tone/confirmation tone.
You can also view the Network parameters (IP Address, Subnet Mask, Connection Type. etc.) on the phone’s
display. See “System Status”.
For a complete list of commands, refer “System Commands” in the Appendix.
User Mode
• Lift the receiver of the phone.
•Dial #18 to enter the User mode.
• Dial the User Password (default: 1234).
• You will get programming tone.
• Dial the command for the feature/facility you want to configure.
For example,
To configure the destination number for Call Forward -Unconditional, dial 51-Destination Number-#*
• To configure 2001 as the destination number for Call Forward-Unconditional, dial 512001#*
•Dial 0 to exit programming mode.
For a complete list of commands, refer “System Commands” in the Appendix.