Specifications

16 Matrix SETU ATA211 System Manual
• In the Login as combo box, select User.
• In the Password field, enter 1234, the default User Password.
• Click the Login button.
• On successful login, the User mode page will open.
• The left pane displays User Settings and Status links.
• Click the User Settings link to expand. The sub-links to the functions and features that are allowed
to be configured from the User mode appear on the left pane: Supplementary Features, Speed
Dialing, Network, User Password, Syslog, and Factory Defaults.
• Click the Status link to view the status of the system and the ports.
Configuring using a Phone
You can enter the Admin mode and the User mode using the phone connected to the FXS Port of SETU ATA211,
and change feature settings, and certain network parameters like the IP Address and Subnet Mask of the LAN and
the WAN port of SETU ATA211, select the Connection Type (IP Addressing) by dialing “System Commands” from
the phone connected to the FXS port of SETU ATA211.
You can also dial System Commands to view the current IP Addresses of the WAN and LAN Ports (if your phone
has a display).
Follow the instructions given below to configure the system from the phone.
Admin Mode
• Lift the receiver of the phone.
•Dial #19 to enter the Admin mode.