Specifications

12 Matrix SETU ATA211 System Manual
• On successful completion of initialization cycle, each LED will glow as per the call conditions as
summarized below:
You can also view the status of the ports on the Status page of the web-based graphical user interface of SETU
ATA211. See “System Status”.
LED Status Meaning
FXS Continuously ON Indicates that FXS port is either Off-hook or in speech during
incoming call / outgoing call.
Blinks fast 200ms ON,
200ms OFF
Indicates that FXS port is in Error state during incoming/outgoing
call.
Blinks slow 500ms ON,
500ms OFF
Indicates that FXS port is Ringing for incoming call or Number is
being dialed for outgoing call (After end of dialing).
Continuously OFF Indicates that FXS port is in On-hook.
FXO Continuously ON Indicates that FXO port is either Off-hook or in speech during
incoming/outgoing call.
Blinks fast 200ms ON,
200ms OFF
Indicates that FXO port is in Error state during incoming/outgoing
call.
Blinks slow 500ms ON,
500ms OFF
Indicates that FXO port is Ringing for incoming Call or Number is
being dialed for outgoing call (After end of dialing).
Continuously OFF Indicates that FXO port is On-hook.
SIP1 Continuously ON Indicates that SIP1 is enabled and is registered with the SIP server
or 'Active' status of SIP Trunk.
Blinks fast 200ms ON,
200ms OFF
Indicates that SIP1 is enabled but not registered with the SIP server
(SIP is configured as proxy).
Blinks slow 500ms ON,
500ms OFF
Indicates that SIP1 is enabled but not registered with the SIP server
(SIP is configured for P2P calling).
Continuously OFF Indicates that SIP1 is disabled.
SIP2 Continuously ON Indicates that SIP2 is enabled and is registered with the SIP server
or 'Active' status of SIP Trunk.
Blinks fast 200ms ON,
200ms OFF
Indicates that SIP2 is enabled but not registered with the SIP server
(SIP is configured as proxy).
Blinks slow 500ms ON,
500ms OFF
Indicates that SIP2 is enabled but not registered with the SIP server
(SIP is configured for P2P calling).
Continuously OFF Indicates that SIP2 is disabled.