Specifications

Matrix SETU ATA211 System Manual 11

Connecting SETU ATA211

• Connect a standalone computer/ LAN Switch to the LAN Port of SETU ATA211 using an Ethernet cable.

• Connect the WAN Port of SETU ATA211 to the IP Network—a DSL modem or Router or a LAN

Switch—using the Ethernet cable provided to you.

• Connect a telephone to the FXS Port of SETU ATA211, using a standard telephone cable with an RJ11

plug.

You may also connect a PBX to the FXS port of SETU ATA211.

• Connect the PSTN line to the FXO Port of SETU ATA211, using a standard telephone cable with an RJ11

plug.

You may also connect PBX to the FXO port of SETU ATA211.

• Connect the power adapter provided with SETU ATA211 to the power jack labeled 12VDC-1A(MAX).

• Connect the adapter plug into a power outlet.

• Switch ON power.

• Wait for the Reset Cycle to complete.

Reset Recycle

• At Power ON,

• POWER LED will glow Green, continuously.

• All LEDs—FXS, FXO, SIP1 and SIP2 —will blink Red thrice (250 ms On - 250 ms Off).

DSL Modem/

Router

PC/LAN

POTS

Power

Adaptor