Specifications

142 Matrix SETU ATA211 System Manual
Firmware
• Version-Revision: Current Software Version-Revision of SETU ATA211 is displayed here.
.
• Kernel Date: The Date of current Kernel of the system is displayed here.
Auto Configuration
•Status: This field displays the type of Auto Configuration option selected.
• Next Resync: This field displays when the system will resync next for Auto Configuration.
• Last Resync: This field displays the time when the system last resynchronized with the Auto Configuration
server.
• You may log out of Jeeves.
Viewing System Status on Phone
To view System Status on the phone’s display from Admin Mode,
• Lift the receiver of the phone.
•Dial #19.
• Dial the Admin Password (default: 1234).
To view System Status on phone’s display from User Mode,
• Lift the receiver of the phone.
•Dial #18.
• Dial the User Password (default: 1234).
You will get programming tone.
On entering Admin/User Mode,
• Dial the System Command for the status you want to view.
• You get confirmation tone.
• Go On-Hook (replace the receiver of the phone) on confirmation tone.
• Your phone will ring.
• The status for the port or trunk for you dialed the command will be displayed on your phone.
For example:
To view the IP address of the WAN port,
Dial 31-#*