Specifications

Matrix SETU ATA211 System Manual 113

2. Click the Supplementary Features link.

3. Keep the Call Waiting check box enabled.

4. Click Submit to save the settings.

5. You may log out.

Using Commands

• Lift handset.

•Dial #19-Admin Password (default: 1234).

•Dial #18-User Password (default: 1234).

•Dial 72-1-#* to enable.

•Dial 72-0-#* to disable.

• Replace handset.

Using Call Waiting

When call waiting is enabled and you are busy on a call with party A,

• You will hear beeps indicating another incoming call.

• You may choose to do any of the following:

• Reject the call, by dialing Flash-#3. The beeps will stop, you will remain in speech with party A.

Incoming call on the FXO port cannot be rejected. Hence, issuing this command will only stop playing

beeps and you will remain in speech with party A.

• put party A on hold, by dialing Flash-#4. The beeps will stop, you will be in speech with party B.