Specifications

98 Matrix SETU ATA211 System Manual
3. Click Syslog.
4. Configure the following parameters:
• Syslog: Select the check box to enable. Default: Disabled.
When the Debug flag is enabled, the system will send the debug messages to the Syslog Server IP
address. Debug report can be viewed on the Syslog Server or any other application which can capture
the Syslog messages/debug sent by the system.
• Syslog Server Address: Port: Enter the IP Address of the Syslog Server.
Enter the address of the Listening Port of the Syslog Server from 1024-65535; 514. By default the
remote server port address is '514'.
• Syslog Levels: By default, all debug levels are selected. Clear the check box to disable the debug
level you do not want. The system will send debug messages only for the level you have selected.
ATA supports following Syslog Levels:
•APPL
•CONFIG
•SYS
•SIP
•CALL
•DSP
•REG
•SNTP
•STACK
•NAT
• AUTO CONFIG
•FXO
5. Click Submit to save the settings.