Specifications

• Connect a telephone to the FXS Port of SETU ATA211, using a standard

telephone cable with an RJ11 plug.

• Connect the line from PSTN to the FXO Port of SETU ATA211.

• Connect the power adapter provided with SETU ATA211 to the power jack

labeled 12VDC-1A(MAX).

• Connect the adapter plug into a power outlet.

• Switch ON power.

Configuring SETU ATA211

SETU ATA211 provides an embedded web server with a graphic user Interface

(GUI), Jeeves, for configuration. You can access this embedded web server on

the PC you connected to the LAN Port.

The default IP Address of the LAN Port of SETU ATA211 is: 192.168.002.6

The default Subnet Mask of the LAN Port of SETU ATA211 is: 255.255.255.0

• Make sure your PC is in the same Subnet as the LAN Port of SETU ATA211.

Change the Subnet Mask of the PC, if necessary.

• Open a web browser (Internet Explorer Version 7 or higher or Mozilla Firefox 3.5

or higher) on the PC.

•Type 192.168.002.6, the default IP Address of the LAN Port of SETU ATA211 in

the address bar of the browser.