SETU ATA211 Quick Start
Disclaimer Matrix Comsec reserves the right to change, at any time, without prior notice, the product design, specifications, components, as engineering and manufacturing may warrant. This is a general documentation for all models/configurations of the product. The product may not support some of the features/facilities described in this document.
SETU ATA211 VoIP-FXS-FXO Adaptor Quick Start Package Contents • • • • • • • SETU ATA211 Adapter 12V, 1.
Thank you for choosing SETU ATA211! Please read the instructions in this Quick Start to install and configure the basic settings to make and receive VoIP and PSTN calls. Connecting SETU ATA211 Select an appropriate site and mount SETU ATA211. Do not install the system at the places where shocks or vibrations are frequent or strong. Use only the power adapter included in the SETU ATA211 package. Using an alternative nonqualified power adapter may possibly damage the unit.
• Connect a telephone to the FXS Port of SETU ATA211, using a standard telephone cable with an RJ11 plug. • Connect the line from PSTN to the FXO Port of SETU ATA211. • Connect the power adapter provided with SETU ATA211 to the power jack labeled 12VDC-1A(MAX). • Connect the adapter plug into a power outlet. • Switch ON power. Configuring SETU ATA211 SETU ATA211 provides an embedded web server with a graphic user Interface (GUI), Jeeves, for configuration.
The Login page opens. You can also use the WAN Port of SETU ATA211 to access the embedded web server in the same manner. The default IP Address of the WAN Port of SETU ATA211 is: 192.168.001.171 The default Subnet Mask of the WAN Port of SETU ATA211 is: 255.255.255.0 SETU ATA211 offers two Login modes: Admin and User. • The Admin mode allows you to configure the entire system, access all system features and facilities.
• In the Login As box, select Admin. • In the Password field, enter 1234, the default Admin password. • Click Login button. • On successful login, the Home page will open. The links Basic Settings, Advanced Settings, Supplementary Services and Status, appear on the left pane. Basic Settings are sufficient to get your SETU ATA211 into operation.
• Click Basic Settings link. The links to the different basic parameters appear on the left pane. You may either use the Wizard to guide you through the configuration or selectively configure the Basic Settings pages. When you use selective configuration, • Click Basic Settings link to expand. • Click each parameter link, Region, SIP, FXO, FXS, Passwords, Network. The selected parameter page opens. • Set the desired values on the page. • Click Submit to save your settings on the page.
When you use the Wizard, • Click the Wizard icon on the top right of your screen. • The Next button takes you to the next page, saving the changes you made on the current page. • The Back button returns you to the previous page. • The More button expands parameters on the page. • The Less button collapses parameters on the page. • .
Corporate Office: 394-GIDC, Makarpura, Vadodara - 390010, India. Tel.:+91 265 2630555, Fax: +91 265 2636598 E-mail: Info@MatrixComSec.com Factory: 39-GIDC, Waghodia - 391760, Dist. Vadodara, India. Tel.: +91 2668 262056/57 Technical Support: Tel.: +91 2668 263172/73, Fax: +91 2668 262631 E-mail: Support@MatrixComSec.com www.MatrixComSec.com Version 3, February 2011 MATRIX COMSEC PVT. LTD.
