ROWER Rower_081201.
Rower_081201.
TABLE OF CONTENTS CHAPTER 1: IMPORTANT SAFETY INSTRUCTIONS 1.1 1.2 PAGE # Before Getting Started .................................................................................................... 02 Read and Save These Instructions ................................................................................... 02 CHAPTER 2: SETUP 2.1 2.2 2.3 Getting Started .............................................................................................................. 03 Choosing a Location .
CHapter 1: Important Safety Instructions 1.1 Before getting Started It is the sole responsibility of the purchaser of Matrix Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel, on proper usage of the equipment. This Owner’s Manual describes the functions of the following product: Matrix Rower • Do not operate where aerosol (spray) products are being used or when oxygen is being administered. • Do not remove the fan cages.
CHapter 2: Setup 2.1 GETTING STARTED Read the Owner’s Manual before setting up the Matrix Rower. Place the unit where it will be used before beginning the setup procedure. 2.2 choosing a location The site should be well-lit and well-ventilated. Place the Rower on a structurally solid flat surface and kept a few feet from the wall or any equipment. If the site has a heavy plush carpet, to protect the carpeting and machinery, you should place a rigid plastic base under the unit.
CHapter 3: Serial Number Location 3.1 Serial number location Rower SERIAL # PLACEMENT Rower_081201.
CHapter 4: Rower Parts and Assembly Guides 4.1 UNPACKING THE Rower The Matrix Air Rower is carefully inspected before it is packaged. Carefully unpack the unit and dispose of the box material. NOTE: In case any of these parts are missing from the package, please contact Matrix Fitness or the local authorized dealers. CAUTION: The Rower weighs 41 kg (90 lbs). To avoid injury to the user and the unit, be sure to have proper assistance to remove and move the unit.
CHapter 4: Rower Parts and Assembly Guides 4.2 Fastners & Assembly tools Rower ROWER PARTS NO. DESCRIPTION QUANTITY B42 SOCKET BUTTON HEAD BOLT (M8 x 1.25P x 32L) 2 D09 SOCKET BUTTON HEAD SCREW (M6 x 1.0P x 15L) 4 D10 SPRING WASHER (SW6 6.1 x 12. 2 x 1.5t) 4 F06 FLAT WASHER ( 10.2 x 19 x 2.0t) 4 F08 NUT (3/8"-16NNC) 2 F07 CROSS HEAD SCREW (M5 x 0.8P x 15L) 2 F19 FLAT WASHER ( 5.2 x 12 x 1.2t) 2 H04 SOCKET BUTTON HEAD SCREW (M8 x 1.25P x 19L) H05 SPRING WASHER (SW8 8.2 x 15.
CHapter 4: Rower Parts and Assembly Guides 4.3 Assembly steps STEP 1 H04 STEP 2 H04 F19 F19 F07 F07 H05 H04 H05 H04 1) Secure the front foot to the frame bracket using two bolts (H04). 1) Attach the pedal assembly to the aluminum rail with four bolts (H04) and spring washers (H05). 2) Attach the seat rail rod to the aluminum rail using one screw (F07) and flat washer (F19). Rower_081201.
CHapter 4: Rower Parts and Assembly Guides 4.3 Assembly steps STEP 3 STEP 4 F04 F04 F20 H05 H04 F20 H05 H04 D10 D10 D09 D09 F19 F07 F19 F07 1) Mount the seat to the seat bracket with 4 screws (D09) and washers (D10). 2) Slide the seat assembly onto the aluminum rail. 3) Attach the seat stop bumper to the aluminum rail using the screw (F07) and washer (F19). 1) Place the rear foot position plate F04 inside the aluminum rail close to the edge.
CHapter 4: Rower Parts and Assembly Guides 4.3 Assembly steps STEP 5 STEP 5 CONTINUED B42 F16 F15 B42 F06 F16 F06 F15 N16 N16 1) Connect the sensor cables from the main frame and the aluminum rail. F01 F01 F06 F08 F06 F08 2) Place the aluminum rail into the rail bracket of the main frame, and tighten them with using two bolts (F18), four washers (F06) and two nuts (F08). 3) Mount the handlebar bracket to the rail bracket using two bolts (B42). Rower_081201.
CHapter 4: Rower Parts and Assembly Guides 4.3 Assembly steps STEP 6 N09 N08 1) Plug the two console cables into the console. Secure the console to the console support using the bolt (N08) and nylon nut (N09). ASSEMBLY COMPLETE Assembly is complete. 10 Rower_081201.
CHapter 5: Using The Workouts Using the workouts To turn the screen display on, press POWER button. When the display comes on, “00:00” will be flashing in the TIME window. 5.1 MANUAL PROGRAM You can either choose Time or Distance as your target. 1) Choosing Time and Starting: Use the up/down arrow buttons to enter your workout time. Time of between 1 and 180 minutes can be selected. When the time you choose is showing in the TIME window, press START button. The timer will begin counting down to zero.
CHapter 6: Maintenance Maintenance The Matrix Rower is built for commercial use 12 hours a day and seven days a week. However, as a club manager or owner, you are responsible for cleaning and maintaining the unit’s integrity. If you fail to maintain the Rower as described below, it could affect or void the Matrix limited warranty. NOTE: Safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear.
CHapter 7: Product Specifications Matrix Rower CONSOLE Display Screen Extra-large LCD display Display Readout Time, Distance, SPM (strokes per minute), Stroke, Watts, Heart Rate, Calories Programs Manual, Race, Training Telemetric Receiver Yes TECHNICAL DATA Resistance Technology Fan blade system Resistance Levels 12 Drive System Coil spring poly-V belt Product Weight 41 kg / 90 lbs Max User Weight 160 kg / 350 lbs Power Requirement Battery powered for LCD display SPECIAL FEATURES Handle
M AT r i x F it n ess syste m s | 1 61 0 L a n d ma r k D r i v e Cottag e G rov e w i 53 527 USA To l l Fre e 8 6 6 . 693.4 8 63 m a t r i x f i t n e ss . co m Fa x 60 8 . 8 3 9. 8 687 PA RT # 0 0 0 0 0903 53 REV. 1.0 Rower_081201.
