Product manual

Page | 13
a. Dot matrix profile window: Displays resistance level during manual program and your pace
vs. PC boat’s during race program.
b. Data display windows: There are 6 data display windows displaying Time & Time/500M,
SPM, Distance, Strokes/Total Strokes, Watts/Calories and Pulse. During program setting, the
appropriated data window will blink to indicate which data you are setting currently. Press U P / D O W N
key to adjust the value and ENTER key to confirm the value.
Time display: It represents the remaining program time. During program, time display will be
showing on both time display window and big window below the dot matrix.
Time/500M display: It represents the total time to row 500M distance with your speed.
SPM display: It represents strokes per minute.
Distance display: It represents the total distance in meters.
Strokes display: It represents your total rowing strokes at current program.
Total strokes: It represents your total rowing strokes since the beginning. It accumulates
continuously throughout the battery life even if you reset the console. It will only reset to 0, after you
change the battery.
Watt display: It represents your workout effort in figures.
Calories display: It represents the calorie count during your workout.
Pulse display: It represents your current heart rate. It can preset during program setup as a target
goal. The heart rate monitor will only work with wireless transmission system.
Note:
1) During data displaying, time window will display time & time/500M each for few seconds;
switch back & forth. Same as strokes/total strokes and watt/calories display.
2) Time, distance, strokes and calories can also be set as goal during program. Setting a
number besides 0 in those slots will count the number down. If it’s set at 0, it will count up.
3) A+ represents the average value when it shows in the display window. If the program is
paused or ended, each data display will flash back & forth of the current value and its
average value.
c. Program window: There are two programs: Manual and Race. They will display at this
window and blink for selection.
3. K E YS : There are 6 function keys for program operation.
a. START/STOP key: Pressing the START/STOP key once will execute the programs and all
data will start counting. Pressing the START/STOP key one more time will enter program pause