Owner`s manual
1514
RECOMMENDED CLEANING TIPS
Preventative maintenance and daily cleaning will prolong the life and look of your equipment.
A Use a soft, clean cotton cloth. DO NOT use paper towels to clean surfaces on the treadmill. Paper towels are abrasive and can
damage surfaces.
B Use a mild soap and damp cloth. DO NOT use ammonia based cleaner or alcohol. This will cause discoloring of the aluminum and
plastics it comes into contact with.
C Do not pour water or cleaning solutions on any surface. This could cause electrocution.
D Wipe the console, heart rate grip, handles, foot pads and handlebars after each use.
For cleaning 7xe displays, use distilled water in an atomizer spray bottle. Spray distilled water onto soft, clean, dry cloth and wipe
display until clean and dry. For very dirty displays, adding vinegar is recommended.
CAUTION: Be sure to have proper assistance to install and move the unit in order to avoid injury or damage.
CHECK FOR DAMAGED PARTS
DO NOT use any equipment that is damaged or has worn or broken parts. Use only replacement parts supplied by Matrix Fitness.
MAINTAIN LABELS AND NAMEPLATES.
Do not remove labels for any reason. They contain important information. If unreadable or missing, contact Matrix Fitness Systems for
a replacement. 1-866-693-4863, www.matrixfitness.com
MAINTAIN ALL EQUIPMENT
Preventative maintenance is the key to smooth operating equipment, as well as keeping the user’s liability to a minimum. Maintain
a clean area around the equipment, free from dust and dirt. Equipment needs to be inspected at regular intervals. Defective
components must be replaced immediately. Improperly working equipment must be kept out of use until it is repaired. Ensure that
any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. Matrix Fitness Systems will
provide service and maintenance training at our corporate facility upon request or in the field if proper arrangements are made.
CONSOLE RESPONSIVENESS ISSUES (CONSOLE REBOOT):
Press and HOLD the Channel Up and Channel Down Button until you hear a Beep. Your console will reset.
CARE AND MAINTENANCE
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our bikes so lubrication is not needed. The most important
maintenance step is to simply wipe your perspiration off the bike after each use.
HOW DO I CLEAN MY MACHINE?
Clean with soap and water cleaners only. Never use solvents on plastic parts. Cleanliness of your unit and
its operating environment will keep maintenance problems and service calls to a minimum. For this reason,
Customer Tech Support recommends that the following preventive maintenance schedule be followed.
DA I LY
• Unplug the unit. Clean entire machine using water and a mild soap or other Matrix
approved solution (cleaning agents should be alcohol and ammonia free).
• Inspect the power cord. If the power cord is damaged, contact Customer Tech Support.
• Make sure the power cord is not underneath the unit or in any other area where it can
become pinched or cut during storage or use.
WEEKLY
Clean underneath the bike, following these steps:
• Turn off the bike.
• Move the bike to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the bike.
• Return the bike to its previous position.
MONTHLY
• Inspect all assembly bolts and pedals on the machine for proper tightness.
• Clean any debris off of the seat guide rail.
To remove power
from the exercise
bike, the power cord
must be disconnected
from the wall outlet.
WARNING
MX_12_HUR3x_5x_7xe_OM_Rev1_3.indd 14-15 10/25/12 8:36 AM