Owner`s manual
4948
MANAGER MODE AND ENGINEERING MODE
3X AND 5X CONSOLES:
These sections allow users to manipulate default settings for the machines. It may be accessed by pressing the Level Up / Level
Down keys simultaneously for 5 seconds. To change a setting, press “Enter” on the keypad under ‘Manager Mode’ or ‘Engineering
Mode’ and use the level buttons and numeric keypad to enter a category and change the values. Pressing “Enter” again will save the
change. Pressing “Back” or “Stop” will bring you to the previous menu. To exit Manager or Engineering Mode, hold “Stop” down for
5 seconds. Below is a list of the settings that can be changed.
MANAGER MODE SETTINGS: ENGINEERING MODE SETTINGS:
Default Time
Default Level
Default Age
Default Weight
Accumulated Distance
Accumulated Time
Language
Software Version
Speed/Distance Mode
Out of Order
Gender
Sound Mode
Maximum Time
Disable Errors
Speed Units
Machine Type
Power Save Time
Pause Time
Serial Number
Club ID
ErP Time
Am System
Audio Source
Volume control
7XE CONSOLE:
These sections allow users to manipulate default settings for the machines. Manager Mode may be accessed by pressing ENTER, 1,
0, 0, 1, Enter on the keypad. Engineering Mode may be accessed by pressing ENTER, 2, 0, 0, 1, Enter on the keypad. The screen
shots on the next page show what you will see when you enter Manager Mode and Engineering Mode.
This console has a fully integrated touch screen display. Lightly touch the screen and use the intuitive interface to adjust the settings.
Any and all changes made will be saved when the “home” button is touched in the upper left-hand corner of the screen. Touching
the “home” button will exit manager or engineering mode and return you to the main screen. It is not necessary to touch this button
after each setting is changed.
CONSOLE DESCRIPTION:
The Matrix machine is inspected before it is packaged. It is shipped in two pieces: the base
and the console. Carefully unpack the unit and dispose of the box material.
MX_12_HUR3x_5x_7xe_OM_Rev1_3.indd 48-49 10/25/12 8:37 AM