Owner`s manual

3332
Z12
Z11
Z13
Z51
G12
6
2
2
SPRING WASHERZ12 4
BUTTON HEAD HEX
SOCKET CAP SCREW
WITH NYLOC (M5x12L)
Z51 4
2Z13
4Z11
BUTTON HEAD SCREW
(M5x10L)
BUTTON HEAD HEX SOCKET
CAP SCREW (M8x25L)
ASSEMBLY STEP 4
A Open WHITE AND GREEN HARDWARE BAGS.
B Attach MANUAL INCLINE LIFT LEVER to GUIDE
RAIL SET using 4 BOLTS (D), 4 FLAT WASHERS
(E), 4 SPRING WASHERS (F) and 4 NUTS (G).
C Align GUIDE RAIL SET with MAIN FRAME as
shown.
D Lift up on the MANUAL INCLINE LIFT LEVER
and place it in one of the holes inside the MAIN
FRAME.
E Attach the GUIDE RAIL SET to the MAIN FRAME
using 4 BOLTS (G), 4 FLAT WASHERS (H), 4
SPRING WASHERS (I) and 4 NUTS (J).
WHITE HARDWARE BAG :
ASSEMBLY STEP 3
A Open YELLOW HARDWARE BAG.
B Attach the STABILIZER TUBE to the MAIN
FRAME using 2 BOLTS (A), 2 SPRING
WASHERS (B) and 2 ARC WASHERS (C) on
each side.
BUTTON HEAD HEX SOCKET CAP SCREW W/NYLOC(M8x20L)Z31 4
SPRING WASHERZ32 4
FLAT WASHERZ33 4
YELLOW HARDWARE BAG CONTENTS :
Z33
Z32
Z31
GREEN HARDWARE BAG :
MX_12_HUR3x_5x_7xe_OM_Rev1_3.indd 32-33 10/25/12 8:36 AM