Owner`s manual
27
UPRIGHT CYCLE ASSEMBLY
There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly
instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the
bike could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the
bike, the assembly instructions must be reviewed and corrective actions should be taken.
Before proceeding, find your unit’s serial number as shown in the picture below.
ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:
» Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
*The console serial number can be found in the Manager Mode and Engineering Mode.
WARNING
SERIAL NUMBER LOCATION
CONSOLE SERIAL NUMBER:
MODEL NAME: MATRIX
FRAME SERIAL NUMBER:
UPRIGHT BIKE C8000
RECUMBENT BIKE R8000
MX_12_HUR3x_5x_7xe_OM_Rev1_3.indd 26-27 10/25/12 8:36 AM