Specifications

55
9.18 HEARTRATE BOARD REPLACEMENT
CHAPTER 9: PART REPLACEMENT GUIDE
1) Unplug treadmill.
2) Remove console as outlined in Section 9.12.
3) Heartrate Board is located in front of the red Emergency Stop button (Figure A).
4) Disconnect wires from each side of the Heartrate Board (Figure B).
5) Use a Phillips screwdriver to remove two screws, one from each side of the Heartrate Board mounting bracket (Figure C).
6) Be sure to fully seat the wires on the new Heartrate Board and test grips after console is reinstalled.
FIGURE A
FIGURE B
FIGURE C