Specifications

23
CHAPTER 8: TROUBLESHOOTING
8.4 ERROR MESSAGES ON THE CONSOLE
ERROR CODE DESCRIPTION
0x0044 Actual speed is higher than commanded speed by limit and is accelerating.
0x0043 RPM read from RS232 mismatch RPM measured from the speed / RPM line only used for AC
motors.
0x01A2 Elevation direction is reversed.
0x01A0 Elevation is disconnected.
0x0140 Elevation is stalled.
0x01A1 Calibration on the elevation motor fails.
0x02A0 Speed is commanded but no belt movement detected (could be missing magnet).
0x02AE Checksum failure on critical NOVRAM loading.
0x02AF Checksum failure on non-critical NOVRAM loading.
0x029F Error (Drive Fault Report) created by the motor controller - only used for AD motors.
0x02B1 The emergency circuit on the interface board failed.
0x02B2 The emergency circuit on the interface board active.
0x04A0 The console's communications is lost.
0x04A1 The motor controller board's communication is lost.
0x0441 Receives a command from the console with its correct packet, but the interface board has no
function to support it.
0x0442 The received command code from the console is correct and is supported, but it has less or
more data arguments.
0x0301 Flash or EEPROM error.