T R E A D M I L L O W N E R ’ S M A N U A L
TABLE 1.0 OF CONTENTS 1.1 1.2 1.3 IMPORTANT SAFETY INSTRUCTIONS Proper Usage Check for Damaged Parts Important Safety Instructions Electrical Requirements Grounding Instructions 1 1 1 2 2 2.0 2.1 2.2 2.3 SETTING UP THE TREADMILL Unpacking Treadmill Contents Optional Equipment 3 3 3 3 3.0 3.1 3.2 3.3 3.4 3.5 OVERLAY DESCRIPTION AND CUSTOM SETTING The Console Manager Club Settings Manager Screen Description Manager Screens Exceptions/Details USING CSAFE 4 4 4 4 5 6 4.0 4.1 4.2 4.
1.0 IMPORTANT SAFETY INSTRUCTIONS It is the sole responsibility of the purchaser of Matrix Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. When using an electrical product, basic precautions should always be followed, including the following: DANGER To reduce the risk of electric shock: Always unplug this equipment from the electrical outlet immediately after using and before cleaning.
1.0 IMPORTANT SAFETY INSTRUCTIONS 1.2 ELECTRICAL REQUIREMENTS DANGER Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if the user are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product if it will not fit the outlet; have a proper outlet installed by a qualified technician.
2 .0 SETTING UP THE TREADMILL 2.1 UNPACKING THE TREADMILL The MATRIX tradmill is inspected before it is packaged. It is shipped in two separate packages: the frame and the console. Carefully unpack the unit and dispose of the box material. CAUTION This unit weights 450 lbs / 204 kgs pounds. Be sure to have proper assistance to remove and move the unit, to avoid injury to the user and the unit. 2.2 CONTENTS Frame 1. Treadmill Base 2. Console Supports 3. Hardware Fasteners and Washer Bag Console 1.
3.0 3.1 CONSOLE DESCRIPTION OVERLAY DESCRIPTION AND CUSTOM SETTINGS PROGRAMS Simple program view and selection buttons. Six programs to choose from. START/QUICK START One touch Start and Quick Start ENTER Quick entry of information and level selection. STOP/HOLD TO RESET Stop/Pause and hold for 3 seconds to reset. CLEAR Clears number keypad entry. NUMBER KEYPAD (T5x) Allows quick information and level selection. UP/DOWN ELEVATION Easy information and elevation selection.
3.0 OVERLAY DESCRIPTION AND CUSTOM SETTINGS 3.4 MANAGER SCREENS EXCEPTIONS/DETAILS P6 ACCUMULATED TIME Active variable displayed in the time seven segment display. Accumulated time is not editable, for display only. Holding the start key resets the accumulated distance. Below is a list of functions for each manager setting. Exceptions will be noted in the description for each manager setting: P0 MAXIMUM TIME (EDIT) This variable controls the program maximum time.
3.0 VARIABLE Maximum Time Default Time Default Level Default Weight Default Age Start Speed Maximum Speed Machine Type IR On/Off Default Channel Default Volume MINIMUM DEFAULT 5 5 1 80 15 0.5 2 T4 OFF 1 1 FACTORY 20 20 1 150 30 1 12 T4 ON 1 16 MAXIMUM 95 NV max time 20 400 100 2 12 T5 ON 30 30 STEP SIZE UNITS 5 5 1 5 1 0.1 0.1 1 1 1 1 minutes minutes pounds years mph mph Unit Unit 3.5 USING CSAFE Matrix is the leader in entertainment availability.
4.0 MAINTENANCE 4.1 RECOMMENDED CLEANING TIPS STEP 1 Locate the two hex head bolts on the rear of the treadmill. The bolts are located at each end of the frame at the back of the treadmill. These bolts adjust the rear belt roller. Do not adjust until the treadmill is on. This will prevent over tightening of one side. STEP 2 The belt should have equal distance on either side between the frame. If the belt is touching one side, do not start the treadmill.
5.0 5.1 INTRODUCTION TO THE PROGRAMS USING THE PROGRAMS ALPHA NUMERIC NORMAL Calories and Pace HR PRESENT Calories and Current HR (HR symbol flashes in response to heart rate). LEVEL CHANGES Temporary display of text "LEVEL XX" with XX being the current level. The Matrix treadmill the user has selected comes with 6 preprogrammed workouts. Quick Start allows the user to get to the workout with the touch of one button.
5.0 USING THE PROGRAMS RUN TIME SCREEN - HEART RATE PROGRAMS Heart rate program alters the "active variable" (either speed or elevation) in to maintain the goal heart rate. The active variable can be altered from its minimum value to the maximum value specified by the user during the pre-programs. If the active variable is at a limit and additional change to the workout is required the useris prompted to increase/decrease the alternate variable. ALPHA NUMERIC Displays message “Select Start to Resume”.
6.0 OPERATING 6.1 MANUAL OPERATION STEP 4 Select Weight by using the UP or DOWN arrow keys. MATRIX design makes using tghe programs as easy as one touch of a button. QUICK START Start pedaling and press QUICK START to begin workout. STEP 5 Press START or ENTER to begin workout. Display, TIME, Starting 3, Starting 2, Starting 1 MANUAL MODE allows you to enter desired time, level and weight. 6.
7.0 EQUIPMENT SPECIFICATIONS > TREADMILL SPECIFICATIONS MX-T5x / T4x Product Name Foot Print Weight Max User Weight Belt Type Frame Construction Running Area Incline Range Speed Min. Speed Max. Motor Type Motor Size Controller Cooling Fan Electrical Receptacle Electrical Plug Electrical Receptacle Electrical Plug Electrical Amps Electrical Amps Deck Wax T5x / T4x inches = 85” x 35” x 62” cm = 215.9 x 88.7 x 157.5 450 lbs 204 kg 400 lbs = 181 kg Habisat Aluminum/Steel 22” x 60” 15% 0.
8.0 8.
8.