Owner`s manual

16
CHAPTER 6: MX-T3X TreaDmill specifications, parts, anD assembly guiDes
6.4 MX-T3X MODEL ASSEMBLY STEPS
FINAL ASSEMBLY
AUTO CHECK
• Press and hold both incline UPand speedDOWN buttons simultaneously for 3 seconds .Then theENGINEERING MODE is shown onto the console.
• Press the incline “UP” button to find the “AUTO CHECK” screen.
• Press the incline “START” button and then, the treadmill will run the auto check function automatically. This will take around 3 minutes to run.
• After auto check is complete “AUTO CHECK OK” will show on the console. Then, press EMERGENCY STOP key twice to back to initial starting
screen.
STEP 3
STEP 4
FINAL ASSEMBLY OPTIONAL ENTERTAINMENT
ACCESSORY SHOWN
Z53
Z53
06' Treadmill's OM.indd 20 2006/11/22 9:31:46 AM