Specifications

1.2
ELECTRICAL REQUIREMENTS
For your safety and treadmill performance, the ground on this circuit must be non-looped.
Please refer to NEC article 210-21 and 210-23. Your Treadmill is provided with a power
cord with a plug listed below and requires the listed outlet. Any alterations of this power
cord could void all warranties of this product.
120V UNITS
The Matrix MX-T3x 120 treadmill is for use on a nominal 120-volt circuit and has a non-
looped grounding plug. Make sure that the 110V treadmill is connected to an outlet, NEMA
5-20R, having the same configuration as the plug. No adapter should be used with this
product.
220V UNITS
The Matrix MX-T3x 220 treadmill is for use on a nominal 220-volt circuit and has a non-
looped grounding plug. Make sure that the 220V treadmill is connected to an outlet, NEMA
6-20R, having the same configuration as the plug. No adapter should be used with this
product.
1.0 IMPORTANT SAFETY INSTRUCTIONS
2
120 NEMA 5-20R
2
20 NEMA 6-20R
120
NEMA 5-20R
2
20
NEMA 6-20R
1.3 GROUNDING INSTRUCTIONS
The treadmill must be grounded. If it should malfunction or breakdown, grounding provides
a path of least resistance for electric current to reduce the risk of electric shock. The tread-
mill is equipped with a cord having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances. If the user does not follow
these grounding Instructions, the user could void the Matrix limited warranty.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if the user is in doubt
as to whether the product is properly grounded. Do not modify the plug provided with the
product if it will not fit the outlet; have a proper outlet installed by a qualified technician.