Specifications

3) Adjusting the Seat Height
3.0 ADJUSTING THE SEA
T HEIGHT
Your MATRIX Cycle is designed for ease of use. We have incorporated seat height adjustments
that are easily located and simple to adjust.
3.1 UPRIGHT SEAT HEIGHT
To adjust the seat height on the Upright Cycle, locate the red pull pin before you mount the
Cycle. To lower the seat down, pull the red knob while holding the seat with the other hand
and slide up or down accordingly. To adjust seat height up, simply raise the seat to desired
position. Our automatic seat lock will set. Make sure you are not seated when you pull the
knob or pull seat up.
3.2 RECUMBENT SEAT HEIGHT
To adjust you’re seat height on the Recumbent Cycle locate the red lever under the right side
of the seat before you mount the Cycle. Place your right hand on the red adjustment handle
under the right side of the seat. Place feet on the ground while seated and slide forward if
needed. Place feet on pedals, gently lift lever under the right side of the seat. Using legs slow-
ly push and slide the seat up or down to desired position. Release lever and allow to lock into
place.
3.3 RECUMBENT LUMBAR SUPPORT
The red knob on the side of the seat is for adjusting the lumbar support. To adjust, simply turn
the knob located on the back rest. Turn the knob forward to increase support and backward to
decrease support until desired comfort has been achieved.
3