Specifications

OpenFlow
•
Support for OpenFlow v1.0—Starting with Junos OS Release 13.3, EX9200 switches
support OpenFlow v1.0. You use the OpenFlow remote controller to control traffic in
an existing network by adding, deleting, and modifying flows on switches. You can
configure one OpenFlow virtual switch and one active OpenFlow controller at the [edit
protocols openflow] hierarchy level on each device running Junos OS that supports
OpenFlow.
[See Understanding Support for OpenFlow on Devices Running Junos OS.]
Related
Documentation
Changes in Behavior and Syntax on page 8•
• Known Behavior on page 11
• Known Issues on page 12
• Resolved Issues on page 13
• Documentation Updates on page 19
• Migration, Upgrade, and Downgrade Instructions on page 19
• Product Compatibility on page 20
Changes in Behavior and Syntax
This section lists the changes in behavior of Junos OS features and changes in the syntax
of Junos OS statements and commands from Junos OS Release 13.3R6 for the EX Series.
•
Dynamic Host Configuration Protocol
•
High Availability and Resilency on page 9
•
Interfaces and Chassis on page 9
•
User Interface and Configuration on page 9
Copyright © 2015, Juniper Networks, Inc.8
Release Notes: Junos OS Release 13.3R6 for the EX Series, M Series, MX Series, PTX Series, and T Series