Specifications

Introduction
Junos OS runs on the following Juniper Networks
®
hardware: ACX Series, EX Series, J
Series, M Series, MX Series, PTX Series, QFabric, QFX Series, SRX Series, and T Series.
These release notes accompany Junos OS Release 13.3R6 for the EX Series, M Series,
MX Series, PTX Series, and T Series. They describe new and changed features, limitations,
and known and resolved problems in the hardware and software.
Junos OS Release Notes for EX Series Switches
These release notes accompany Junos OS Release 13.3R6 for the EX Series. They describe
new and changed features, limitations, and known and resolved problems in the hardware
and software.
You can also find these release notes on the Juniper Networks Junos OS Documentation
webpage, located at http://www.juniper.net/techpubs/software/junos/.
•
New and Changed Features on page 6
•
Changes in Behavior and Syntax on page 8
•
Known Behavior on page 11
•
Known Issues on page 12
•
Resolved Issues on page 13
•
Documentation Updates on page 19
•
Migration, Upgrade, and Downgrade Instructions on page 19
•
Product Compatibility on page 20
New and Changed Features
This section describes the new features and enhancements to existing features in Junos
OS Release 13.3R6 for the EX Series.
•
Hardware
•
Infrastructure
•
Multicast
•
Network Management and Monitoring
•
OpenFlow
Copyright © 2015, Juniper Networks, Inc.6
Release Notes: Junos OS Release 13.3R6 for the EX Series, M Series, MX Series, PTX Series, and T Series