Specifications

All other customers, use the following command:
user@host> request system software add validate reboot
source/jinstall-13.3R61-export-signed.tgz
Replace the source with one of the following values:
•
/pathname—For a software package that is installed from a local directory on the
router.
•
For software packages that are downloaded and installed from a remote location:
•
ftp://hostname/pathname
•
http://hostname/pathname
•
scp://hostname/pathname (available only for Canada and U.S. version)
The validate option validates the software package against the current configuration
as a prerequisite to adding the software package to ensure that the router reboots
successfully. This is the default behavior when the software package being added is
a different release.
Adding the reboot command reboots the router after the upgrade is validated and
installed. When the reboot is complete, the router displays the login prompt. The
loading process can take 5 to 10 minutes.
Rebooting occurs only if the upgrade is successful.
NOTE: After you install a Junos OS Release 13.3 jinstall package, you cannot
issue the requestsystem software rollback command to return to the previously
installed software. Instead you must issue the request system software add
validate command and specify the jinstall package that corresponds to the
previously installed software.
Related
Documentation
New and Changed Features on page 166•
• Changes in Behavior and Syntax on page 172
• Known Issues on page 174
• Resolved Issues on page 176
• Documentation Updates on page 185
• Product Compatibility on page 188
Product Compatibility
•
Hardware Compatibility on page 189
Copyright © 2015, Juniper Networks, Inc.188
Release Notes: Junos OS Release 13.3R6 for the EX Series, M Series, MX Series, PTX Series, and T Series