Specifications

MPLS
•
On PTX Series platform working as LSP ingress router, the MPLS auto-bandwidth
feature might cause FPC to wedge condition with all interfaces down. PR1005339
Network Management and Monitoring
•
This PR fixes the issue where output ifIndex was being exported as 0. Unless there is
a critical business need, we do not plan to backport the fix to releases earlier than 14.1.
PR964745
Routing Protocols
•
For bidirectional PIM, the show multicast statistics command does not display the input
counters. This is because a bidirectional route associates with multiple incoming
interfaces (iif's). The statistics are collected per mroute, and the packet for bidirectional
groups might come in from any of the iif's. There is no way to impose the incoming
traffic of the route to one of the iif's. PIM-SM, on the other hand, has only one iif per
mroute, and hence the incoming counters are displayed for all PIM-SM routes.
PR865694
Resolved Issues: Release 13.3R3
Authentication and Access Control
•
"delete" or "deactivate" of apply-group defining the entire TACACS or RADIUS
configuration configured under [edit system apply-group <>] does not take affect on
commit. This could lead to TACACS or RADIUS based authentication to still continue
working despite removal (delete/deactivate) of configuration. PR992837
General Routing
•
Kernel crash might happen when a router running a Junos OS install with the fix to PR
937774 is rebooted. This problem will not be observed during the upgrade to this Junos
OS install. It occurs late enough in the shutdown procedure that it shouldn't interfere
with normal operation. PR956691
•
On PTX Series platform, performing Routing Engine switchover might cause flabel
(fabric token) to be out of sync between the master Routing Engine and backup Routing
Engine, which results in FPC crash. PR981202
Interfaces and Chassis
•
SFP+-10G-ZR (part number = 740-052562) is not fully supported on
P1-PTX-24-10G-W-SFPP pic. Inserting the optic on P1-PTX-24-10G-W-SFPP pic can
cause FPC core on the pic. PR974783
•
Sometimes cosd generates a corefile when add/delete a child interface on the LAG
bundle. PR961119
Copyright © 2015, Juniper Networks, Inc.180
Release Notes: Junos OS Release 13.3R6 for the EX Series, M Series, MX Series, PTX Series, and T Series