Specifications

MPLS
•
The problem is seen in PTX Series routers where the composite next-hops are not
observed for a given VPN mpls route and hence the show route output command gives
a truncated value which results in script failure. This may be due to default disabled
l3vpn-cnh in case of transit l3vpn router on PTX Series platform. If Resync blob is not
set, RPD will create indirect next-hop for transit route on PE-PE connection network
on PTX Series. If Resync blob is set, RPD will create composite next-hop for transit
route on PE-PE connection network on PTX Series. Using composite next-hop (cnh)
can help scaled network. However, either indirect (inh) or composite next-hops work
properly in control and forwarding planes. PR1007311
Network Management and Monitoring
•
At some instances, the master Routing Engine fail to export some syslog facility
messages to the external syslog server after Routing Engine switchover. PR898030
Software Installation and Upgrade
•
Filesystem corruption might lead to Routing Engine bootup failure. This problem is
observed when directory structure on hard disk (or SSD) is inconsistent. Such a failure
should not result in bootup problem normally, but due to the software bug, the affected
Junos OS releases mount /var filesystem incorrectly. The affected platform is PTX.
PR905214
Related
Documentation
New and Changed Features on page 166•
• Changes in Behavior and Syntax on page 172
• Resolved Issues on page 176
• Documentation Updates on page 185
• Migration, Upgrade, and Downgrade Instructions on page 185
• Product Compatibility on page 188
Resolved Issues
This section lists the issues fixed in the Junos OS main release and the maintenance
releases. The identifier following the description is the tracking number in the Juniper
Networks Problem Report (PR) tracking system.
•
Resolved Issues: Release 13.3R6 on page 177
•
Resolved Issues: Release 13.3R5 on page 178
•
Resolved Issues: Release 13.3R4 on page 179
•
Resolved Issues: Release 13.3R3 on page 180
•
Resolved Issues: Release 13.3R2 on page 181
Copyright © 2015, Juniper Networks, Inc.176
Release Notes: Junos OS Release 13.3R6 for the EX Series, M Series, MX Series, PTX Series, and T Series