Specifications

[edit interfaces interface-name optics-options] hierarchy level. The following interface
module supports the SPFF-10G-CT50-ZR transceiver:
PTX:
•
10-Gigabit Ethernet LAN/WAN OTN PIC with SFP+ (model number:
P1-PTX-24-10G-W-SFPP)—Supported in Junos OS Release 13.2R3, 13.3R2, and later
For more information about interface modules, see the “Cables and Connectors” section
in the Interface Module Reference for your router.
[See 10-Gigabit Ethernet 10GBASE Optical Interface Specifications and wavelength.]
•
SFPP-10G-ZR-OTN-XT (PTX Series)—Starting with Junos OS Release 13.3R3, the
SFPP-10G-ZR-OTN-XT dual-rate extended temperature transceiver provides a duplex
LC connector and supports the 10GBASE-Z optical interface specification and
monitoring. The transceiver is not specified as part of the 10-Gigabit Ethernet standard
and is instead built according to ITU-T and Juniper Networks specifications. The
following interface modules support the SFPP-10G-ZR-OTN-XT transceiver:
PTX:
•
10-Gigabit Ethernet PIC with SFP+ (model number:
P1-PTX-24-10GE-SFPP)—Supported in Junos OS Release 12.3R5, 13.2R3, 13.3, and
later
•
10-Gigabit Ethernet LAN/WAN OTN PIC with SFP+ (model number:
P1-PTX-24-10G-W-SFPP)—Supported in Junos OS Release 12.3R5, 13.2R3, 13.3, and
later
For more information about interface modules, see the “Cables and Connectors” section
in the Interface Module Reference for your router.
[See 10-Gigabit Ethernet 10GBASE Optical Interface Specifications.]
•
OTN support for PTX Series—Starting in Junos OS Release 13.3, you can configure
OTN mode on 10-Gigabit Ethernet interfaces on PTX Series Packet Transport Routers.
Only the 24-port 10-Gigabit Ethernet LAN/WAN PIC with SFP+ (model number:
P1-PTX-24-10G-W-SFPP) supports OTN mode. The following OTN framing modes
are supported:
•
10-Gigabit Ethernet LAN-PHY over OTU2e/OTU1e
•
10-Gigabit Ethernet WAN-PHY over OTU2
The following forward error correction (FEC) types are supported:
•
GFEC (G.709)
•
EFEC (G.975.1 I.4)
•
UFEC (G.975.1 I.7)
•
None
Copyright © 2015, Juniper Networks, Inc.170
Release Notes: Junos OS Release 13.3R6 for the EX Series, M Series, MX Series, PTX Series, and T Series