Specifications

•
For a trunk port, the default limit on the maximum number of MAC addresses that
can be learned on a trunk port is 8192. Because a trunk port can be associated with
multiple bride domains, the default limit is the same as the limit for MAC addresses
learned on a logical interface in a virtual switch instance (configured by including
the interface-mac-limit limit statement at the [edit routing-instances
routing-instance-name switch-options interface interface-name] hierarchy level for a
virtual switch instance).
•
The following additional information applies to the "Configuring VLAN Identifiers for
Bridge Domains and VPLS Routing Instances" topic:
The maximum number of Layer 2 interfaces that you can associate with a bridge domain
or a VPLS instance on MX Series routers is 4000.
Layer 2 VPNs Feature Guide for Routing Devices
•
The descriptions of the pw-label-ttl-1 and router-alert-label options in the
control-channel (Protocols OAM) configuration statement topic are incorrectly and
interchangeably stated. The correct descriptions of these options are as follows:
•
pw-label-ttl-1—For BGP-based pseudowires that send OAM packets with the MPLS
pseudowire label and time-to-live (TTL) set to 1.
•
router-alert-label—For BGP-based pseudowires that send OAM packets with router
alert label.
Network Management Administration Guide for Routing Devices
•
The syntax of the filter-interfaces statement in the “SNMP Configuration Statement”
section is incorrect. The correct syntax is as follows:
filter-interfaces {
all-internal-interfaces;
interfaces interface-names{
interface 1;
interface 2;
}
}
[See filter-interfaces.]
Copyright © 2015, Juniper Networks, Inc.146
Release Notes: Junos OS Release 13.3R6 for the EX Series, M Series, MX Series, PTX Series, and T Series